Contact Us
Address
P.O.Box : 172646 Dubai U.A.E
TECHNICAL SPECIFICATIONS:- | |||||
OVERALL SWEEPING WIDTH | SUCTION FAN CASING | ||||
With Dual Brooms | 3300 mm | Construction | Welded Mild Steel | ||
With One Brooms | 2650 mm | Liner | Replaceble Rubber | ||
With Suction Head | 2030 mm | Vacuum Enhancer | For Light / Heavy Material | ||
AUXILIART ENGINE | SWEEPING HEAD | ||||
Model | ALHT4CT1C3 | Type | Dual Chamber Full Width Blast Orifice | ||
Induction System | Turbo | Operating Direction | Forward | ||
Combustion System | Direct Injection Diesel | Suspension | Adjustable Spring Balace | ||
Number of cylinders | 4 | Full Width | 2030mm | ||
Displacement | 4000 cc | Suction Hose Diameter | 350 mm | ||
Power Rating | 101 HP @ 2200 rpm | Blast Hose Diamter | 350 mm | ||
Cooling System | Liquid Cooled | Hose Construction | Reinforced Moulded Rubber Mild Sreel | ||
Starter | 12 Volts, 2.8 Kw | Skids | With Tungsten Carbid Inserts | ||
Altemator | 12 Volts, 55 Amp | Controls | Hydraulic Raise & Lower | ||
Battery | 12 Volts, 80 Ah | Full Width | Adustable Front Skirt | ||
Oil Filter | Spin-on | HYDRAULIC SYSTEM | |||
Air Cleaner | Dry Type | Type | Gear Pump | ||
Safety Shutdown | Automatic | Fluid Capactiy | 70 Liters | ||
ELECTRICAL SYSTEM | Drive | Direct Drive | |||
Display | 3.5" | Filter | 10 micron Spin-on | ||
Outputs | Solidstate/Relay | Strainer | 80 mesh | ||
Protection | Fuse | DUST CONTROL | |||
Controls | 24 Volts | Water | 1000 Liters | ||
DEBRIS HOPPER | Tank Construction | Polyethylene | |||
Capactity | 6 Cubic Metres | Fill Diameter | 50 mm (pipe)/100 mm (tank opening) | ||
Construction | Heavy Gaige Stainless Steel | Controls | Eletric In-cab | ||
Dumping | Hydraulic | GUTTER BROOM | |||
Inspection Doors | One Each Side of Hopper | Type | 4 Segment Steel Tined | ||
Dumping Controls | In Cab | Diameter | 1000 mm | ||
Dumping Height | 1100 mm | Drive | Hydraulic Motor | ||
Dumping Tilt Angle | 52 degrees | Speed | Varible Non-Reversing | ||
Interior Finish | Natural Stainless Steel | Tilt Adjustment | Eletric In-cab | ||
Exterior Finish | Painred, White | LIGHTS | |||
Wander Hose/Nozzle | 200 mm x 4000 mm Length | Side Brush | 1 Unit Each Side | ||
SUCTION FAN | Rear Door | 2 Units | |||
Type | Centrifugal Fan | Aux Engine Bay | 1 Unit | ||
Drive | 3 XPB Section V Belt | OVERALL DIMENSIONS | |||
No. of Blades | 10 | Height | 3090 mm | ||
Diameter | 810mm | Width | 2400 mm | ||
Mounting | 2 Selaed Bearing Units | Length | 6780 mm | ||
Construction | Welded Steel Blades | Empty Weight | 8000 kgs |